This product data sheet is originally written in English. Description The highly accurate and reliable angle measurement system consists of a static line-coded glass circle, which is read by a linear CCD array. A special algorithm determines the exact position of the code lines on the array and determines the precise measurement instantly. As the code on the glass circle is absolute and continuous, no initialization of the instrument is required prior to measurements. A dual axis compensator constantly monitors both axes of the vertical axis tilt. The compensator consists of an illuminated line pattern on a prism, which is reflected twice by a liquid mirror forming the reference horizon. The reflected image of the line pattern is read by a linear CCD array and then used to mathematically determine both tilt components. These components are then used to immediately correct all angle measurements. Type 1201+ Type 1202+ Type 1203+ Type 1205+ Hz, V: 1 (0.3 mgon) 2 (0.6 mgon) 3 (1 mgon) 5 (1.5 mgon) Display least count: 0.1 (0.1 mgon) 0.1 (0.1 mgon) 0.1 (0.5 mgon) 0.1 (0.5 mgon). Method absolute, continuous, diametrical. Compensator Working range: 4 (0.07 gon) Setting accuracy: 0.5 (0.2 mgon) 0.5 (0.2 mgon) 1.0 (0.3 gon) 1.5 (0.5 mgon). Method: centralized dual axis compensator. Distance measurement with Reflector (IR-mode) Description The IR mode EDM transmits an visible laser beam to specular targets such as prisms or reflector tapes. The reflected light is detected by a sensitive photo receiver and converted into an electrical signal. After digitizing and accumulating the signal, the distance is determined by means of modern phase measurement techniques. A modulation frequency of 100 MHz is the time base for the high distance accuracy. The coaxiality and the divergence angle of the laser beam together with the automatic target recognition (ATR), allo w dynamic tracking of targets quickly and accurately in 3 dimensions. A B C Range Standard prism (GPR1): 1800 m (6000 ft) 3000 m (10000 ft) 3500 m (12000 ft) 3 standard prisms (GPR1): 2300 m (7500 ft) 4500 m (14700 ft) 5400 m (17700 ft) 360° prism (GRZ4, GRZ122): 800 m (2600 ft) 1500 m (5000 ft) 2000 m (7000 ft) 360° mini prism (GRZ101): 450 m (1500 ft) 800 m (2600 ft) 1000 m (3300 ft) Mini prism (GMP101): 800 m (2600 ft) 1200 m (4000 ft) 2000 m (7000 ft) Reflector tape (60 mm x 60mm): 150 m (500 ft) 250 m (800 ft) 250 m (800 ft) Shortest measuring distance: 1.5 m. Accuracy (standard deviation ISO 17123-4) / Measure time Standard mode: 1 mm + 1.5 ppm / typ. 2.4 s Fast mode: 3 mm + 1.5 ppm / typ. 0.8 s Tracking mode: 3 mm + 1.5 ppm / typ. The reflectorless EDM PinPoint R1000 measures to targets more than 1000 m away. To measure to targets at such long distances with high measurement accuracy, a new measurement technology was developed. The main component of the EDM is a system analyzer, which uses modulation frequencies in the range of 100 MHz. The system analyzer properties are defined for each individual measurement for both the EDM beam and the target qualities. As a result of the system analysis, the parameters for every individual measurement are now known. The distance is calculated using modern signal processing based on the principle of maximum-likelihood. Besides the drastically increased sensitivity which leads to a sensational increase in reflectorless measurement range, the new EDM system provides many other advantages such as a very high measurement quality and reliability even when measuring in rain, fog, dust or snow. In addition the measurement system helps to prevent errors, by detecting if there are multiple targets within the measurement beam. The highly accurate and reliable angle measurement system consists of a static line-coded glass circle, which is read by a linear measurement instantly. As the code on the glass circle is absolute and continuous, no initialization of the instrument is required A dual axis compensator constantly monitors both axes of the vertical axis tilt. The reflected image of the line The IR mode EDM transmits an visible laser beam to specular targets such as prisms or reflector tapes. After digitizing and accumulating the signal, the on the principle of maximum. The item “LEICA TCR1203+ R1000 TOTAL STATION FOR CONSTRUCTION & SURVEYING 1Y WARRANTY” is in sale since Tuesday, August 6, 2019. This item is in the category “Industrial\Test, Measurement & Inspection\Levels & Surveying Equipment\Total Stations & Accessories”. The seller is “iseisurvey” and is located in Wesley Chapel, Florida. This item can be shipped worldwide.

• MPN: Does Not Apply
• Model: TCR1203+ R1000
• Brand: Leica
• Product: GPS Receiver

This product data sheet is originally written in English. Description The highly accurate and reliable angle measurement system consists of a static line-coded glass circle, which is read by a linear CCD array. A special algorithm determines the exact position of the code lines on the array and determines the precise measurement instantly. As the code on the glass circle is absolute and continuous, no initialization of the instrument is required prior to measurements. A dual axis compensator constantly monitors both axes of the vertical axis tilt. The compensator consists of an illuminated line pattern on a prism, which is reflected twice by a liquid mirror forming the reference horizon. The reflected image of the line pattern is read by a linear CCD array and then used to mathematically determine both tilt components. These components are then used to immediately correct all angle measurements. Type 1201+ Type 1202+ Type 1203+ Type 1205+ Hz, V: 1 (0.3 mgon) 2 (0.6 mgon) 3 (1 mgon) 5 (1.5 mgon) Display least count: 0.1 (0.1 mgon) 0.1 (0.1 mgon) 0.1 (0.5 mgon) 0.1 (0.5 mgon). Method absolute, continuous, diametrical. Compensator Working range: 4 (0.07 gon) Setting accuracy: 0.5 (0.2 mgon) 0.5 (0.2 mgon) 1.0 (0.3 gon) 1.5 (0.5 mgon). Method: centralized dual axis compensator. Distance measurement with Reflector (IR-mode) Description The IR mode EDM transmits an visible laser beam to specular targets such as prisms or reflector tapes. The reflected light is detected by a sensitive photo receiver and converted into an electrical signal. After digitizing and accumulating the signal, the distance is determined by means of modern phase measurement techniques. A modulation frequency of 100 MHz is the time base for the high distance accuracy. The coaxiality and the divergence angle of the laser beam together with the automatic target recognition (ATR), allo w dynamic tracking of targets quickly and accurately in 3 dimensions. A B C Range Standard prism (GPR1): 1800 m (6000 ft) 3000 m (10000 ft) 3500 m (12000 ft) 3 standard prisms (GPR1): 2300 m (7500 ft) 4500 m (14700 ft) 5400 m (17700 ft) 360° prism (GRZ4, GRZ122): 800 m (2600 ft) 1500 m (5000 ft) 2000 m (7000 ft) 360° mini prism (GRZ101): 450 m (1500 ft) 800 m (2600 ft) 1000 m (3300 ft) Mini prism (GMP101): 800 m (2600 ft) 1200 m (4000 ft) 2000 m (7000 ft) Reflector tape (60 mm x 60mm): 150 m (500 ft) 250 m (800 ft) 250 m (800 ft) Shortest measuring distance: 1.5 m. Accuracy (standard deviation ISO 17123-4) / Measure time Standard mode: 1 mm + 1.5 ppm / typ. 2.4 s Fast mode: 3 mm + 1.5 ppm / typ. 0.8 s Tracking mode: 3 mm + 1.5 ppm / typ. The reflectorless EDM PinPoint R1000 measures to targets more than 1000 m away. To measure to targets at such long distances with high measurement accuracy, a new measurement technology was developed. The main component of the EDM is a system analyzer, which uses modulation frequencies in the range of 100 MHz. The system analyzer properties are defined for each individual measurement for both the EDM beam and the target qualities. As a result of the system analysis, the parameters for every individual measurement are now known. The distance is calculated using modern signal processing based on the principle of maximum-likelihood. Besides the drastically increased sensitivity which leads to a sensational increase in reflectorless measurement range, the new EDM system provides many other advantages such as a very high measurement quality and reliability even when measuring in rain, fog, dust or snow. In addition the measurement system helps to prevent errors, by detecting if there are multiple targets within the measurement beam. The highly accurate and reliable angle measurement system consists of a static line-coded glass circle, which is read by a linear measurement instantly. As the code on the glass circle is absolute and continuous, no initialization of the instrument is required A dual axis compensator constantly monitors both axes of the vertical axis tilt. The reflected image of the line The IR mode EDM transmits an visible laser beam to specular targets such as prisms or reflector tapes. After digitizing and accumulating the signal, the on the principle of maximum. The item “LEICA TCR1203+ R1000 TOTAL STATION FOR CONSTRUCTION & SURVEYING 1Y WARRANTY” is in sale since Tuesday, August 6, 2019. This item is in the category “Business, Office & Industrial\Test, Measurement & Inspection\Levels & Surveying Equipment\Total Stations & Accessories”. The seller is “iseisurvey” and is located in Wesley Chapel, Florida. This item can be shipped worldwide.

• MPN: Does Not Apply
• Model: TCR1203+ R1000
• Brand: Leica
• Product: GPS Receiver

Description The highly accurate and reliable angle measurement system consists of a static line-coded glass circle, which is read by a linear CCD array. A special algorithm determines the exact position of the code lines on the array and determines the precise measurement instantly. As the code on the glass circle is absolute and continuous, no initialization of the instrument is required prior to measurements. A dual axis compensator constantly monitors both axes of the vertical axis tilt. The compensator consists of an illuminated line pattern on a prism, which is reflected twice by a liquid mirror forming the reference horizon. The reflected image of the line pattern is read by a linear CCD array and then used to mathematically determine both tilt components. These components are then used to immediately correct all angle measurements. Type 1201+ Type 1202+ Type 1203+ Type 1205+ Hz, V: 1 (0.3 mgon) 2 (0.6 mgon) 3 (1 mgon) 5 (1.5 mgon) Display least count: 0.1 (0.1 mgon) 0.1 (0.1 mgon) 0.1 (0.5 mgon) 0.1 (0.5 mgon). Method absolute, continuous, diametrical. Compensator Working range: 4 (0.07 gon) Setting accuracy: 0.5 (0.2 mgon) 0.5 (0.2 mgon) 1.0 (0.3 gon) 1.5 (0.5 mgon). Method: centralized dual axis compensator. Distance measurement with Reflector (IR-mode) Description The IR mode EDM transmits an visible laser beam to specular targets such as prisms or reflector tapes. The reflected light is detected by a sensitive photo receiver and converted into an electrical signal. After digitizing and accumulating the signal, the distance is determined by means of modern phase measurement techniques. A modulation frequency of 100 MHz is the time base for the high distance accuracy. The coaxiality and the divergence angle of the laser beam together with the automatic target recognition (ATR), allo w dynamic tracking of targets quickly and accurately in 3 dimensions. A B C Range Standard prism (GPR1): 1800 m (6000 ft) 3000 m (10000 ft) 3500 m (12000 ft) 3 standard prisms (GPR1): 2300 m (7500 ft) 4500 m (14700 ft) 5400 m (17700 ft) 360° prism (GRZ4, GRZ122): 800 m (2600 ft) 1500 m (5000 ft) 2000 m (7000 ft) 360° mini prism (GRZ101): 450 m (1500 ft) 800 m (2600 ft) 1000 m (3300 ft) Mini prism (GMP101): 800 m (2600 ft) 1200 m (4000 ft) 2000 m (7000 ft) Reflector tape (60 mm x 60mm): 150 m (500 ft) 250 m (800 ft) 250 m (800 ft) Shortest measuring distance: 1.5 m. Accuracy (standard deviation ISO 17123-4) / Measure time Standard mode: 1 mm + 1.5 ppm / typ. 2.4 s Fast mode: 3 mm + 1.5 ppm / typ. 0.8 s Tracking mode: 3 mm + 1.5 ppm / typ. The reflectorless EDM PinPoint R1000 measures to targets more than 1000 m away. To measure to targets at such long distances with high measurement accuracy, a new measurement technology was developed. The main component of the EDM is a system analyzer, which uses modulation frequencies in the range of 100 MHz. The system analyzer properties are defined for each individual measurement for both the EDM beam and the target qualities. As a result of the system analysis, the parameters for every individual measurement are now known. The distance is calculated using modern signal processing based on the principle of maximum-likelihood. Besides the drastically increased sensitivity which leads to a sensational increase in reflectorless measurement range, the new EDM system provides many other advantages such as a very high measurement quality and reliability even when measuring in rain, fog, dust or snow. In addition the measurement system helps to prevent errors, by detecting if there are multiple targets within the measurement beam. The item “LEICA TCR1203+ R1000 TOTAL STATION FOR CONSTRUCTION & SURVEYING 1Y WARRANTY” is in sale since Tuesday, July 23, 2019. This item is in the category “Business & Industrial\Test, Measurement & Inspection\Levels & Surveying Equipment\Total Stations & Accessories”. The seller is “iseisurvey” and is located in Wesley Chapel, Florida. This item can be shipped worldwide.

• Model: TCR1203+ R1000
• Product: Robotic Total Station
• MPN: Does not apply
• Brand: Leica