Archives for : icr70
NEW Leica ICR70 5 Robotic Total Station Kit w/ CC200 Tablet. This kit includes a NEW iCR70 Total Station which is primarily used with Concrete & General Contractors, Mechanical, Plumbing and Electrical Trades for Layout in buildings/structures. The iCR70 is one of the total stations in Leica’s line of iCON total stations and is completely Calibrated. This kit also includes a Leica CC200 Panasonic Rugged Tablet with iCON Software. 1 – Leica iCR70 5 Robotic Total Station. PowerSearch, ATR, Reflectorless R500 EDM. Accuracy: Approximately 5/32 at 500 ft. 250m/820ft Reflectorless Range. 1 – Leica MPR122 360° Prism. 2 – Leica Li-Ion GEB222 Batteries. 2 – Leica Single Bay GKL311 Battery Chargers w/ Power Supply. 1 – Leica Total Station Transport Case. 1 Year iCR70 Basic CCP. 1 – Leica CC200 10 Panasonic Rugged Tablet. Leica iCON Software Installed 1 – Leica Tablet Holder 1 – Leica GHT63 Pole Clamp 1 – Leica Charger 1 – Hard Transport Case. 1 – Seco Trimax Tripod. 1 – Seco Bipod. 1 – Leica Prism Rod. Layout lines for footings or chalk line for formwork on foundation. Layout points on blinding layer such as pipe insert or cut-outs before pouring concrete. MEP layout of hanger locations for HVAC and duct work, inserts and slits for sheet metal work. Fully automatic layout routines of points on floor or ceiling and lines for pipe wall penetrations.
The iCON iCR70 allows users to: – Layout lines for footings or chalk line for formwork on foundation- Layout points on blinding layer such as pipe insert or cut-outs before pouring concrete- MEP layout of hanger locations for HVAC and ductwork, inserts and slits for sheet metal work- Fully automate layout routines of points on floor or ceiling and lines for pipe wall penetrations- Prepare and execute construction tasks faster, simpler, and more accurately. This robot, tailored to your construction needs, is designed for one-person operation, giving you approximately an 80% increase in productivity over other conventional layout practices. Comes with:- ICR70, 5 robot construction total station with powersearch, automatic target recognition ATR, reflectorless R500 EDM CCD6 and more! CC80-1, Rugged 7 Tablet PC. CSW 243, iCON App “Objects”- Icon Build plus.
Used Leica ICR70 5 Robotic Construction Total Station Kit w/ AP20 Tilt Pole. This kit includes a Used iCR70 Total Station which is primarily used with Concrete & General Contractors, Mechanical, Plumbing and Electrical Trades for Layout in buildings/structures. The iCR70 is one of the total stations in Leica’s line of iCON total stations and is completely Calibrated. Leica’s all new AP20 tilt kit has been added to this kit, allowing accurate layout, without needing to level the prism rod. Call for more information. Ive us a call for customized pricing! 1 – Leica iCR70 5 Robotic Total Station. PowerSearch, ATR, Reflectorless R500 EDM. Accuracy: Approximately 5/32 at 500 ft. 250m/820ft Reflectorless Range. 1 – Leica MPR122 360° Prism. 2 – Leica Li-Ion GEB222 Batteries. 2 – Leica Single Bay GKL311 Battery Chargers w/ Power Supply. 1 – Leica Total Station Transport Case. 1 – Leica CS35 10 Rugged Tablet. Leica iCON Build Software Installed 1 – Leica GHT78 Tablet Holder 1 – Leica GHT63 Pole Clamp 1 – Leica Charger 1 – Leica GEB236 Rechargeable Battery 1 – Leica Tablet Carry Case. 1 – Leica AP20 AutoPole. Targeting ID, Tilt Compensation, and Auto Rod-Height Detection 1 – CCD18 ICR Handle Upgrade 2 – Leica Li-Ion GEB321 Batteries 1 – AP20 Holding Case 1 – Leica AP20 AutoPole Rover Rod – Model: CRP5. 1 – 4K Equipment Carbon Fiber Tripod. 1 – 4K Equipment Carbon Fiber Bipod. Layout lines for footings or chalk line for formwork on foundation. Layout points on blinding layer such as pipe insert or cut-outs before pouring concrete. MEP layout of hanger locations for HVAC and duct work, inserts and slits for sheet metal work. Fully automatic layout routines of points on floor or ceiling and lines for pipe wall penetrations.
NEW Leica ICR70 5 Robotic Total Station Kit w/ CC200 Tablet. This kit includes a NEW iCR70 Total Station which is primarily used with Concrete & General Contractors, Mechanical, Plumbing and Electrical Trades for Layout in buildings/structures. The iCR70 is one of the total stations in Leica’s line of iCON total stations and is completely Calibrated. This kit also includes a Leica CC200 Panasonic Rugged Tablet with iCON Software. 1 – Leica iCR70 5 Robotic Total Station. PowerSearch, ATR, Reflectorless R500 EDM. Accuracy: Approximately 5/32 at 500 ft. 250m/820ft Reflectorless Range. 1 – Leica MPR122 360° Prism. 2 – Leica Li-Ion GEB222 Batteries. 2 – Leica Single Bay GKL311 Battery Chargers w/ Power Supply. 1 – Leica Total Station Transport Case. 1 Year iCR70 Basic CCP. 1 – Leica CC200 10 Panasonic Rugged Tablet. Leica iCON Software Installed 1 – Leica Tablet Holder 1 – Leica GHT63 Pole Clamp 1 – Leica Charger 1 – Hard Transport Case. 1 – Seco Trimax Tripod. 1 – Seco Bipod. 1 – Leica Prism Rod. Layout lines for footings or chalk line for formwork on foundation. Layout points on blinding layer such as pipe insert or cut-outs before pouring concrete. MEP layout of hanger locations for HVAC and duct work, inserts and slits for sheet metal work. Fully automatic layout routines of points on floor or ceiling and lines for pipe wall penetrations.
Used Leica ICR70 5 Robotic Total Station Kit w/ CC200 Tablet & AP20 Tilt Pole. This kit includes an iCR70 Total Station which is primarily used with Concrete & General Contractors, Mechanical, Plumbing and Electrical Trades for Layout in buildings/structures. The iCR70 is one of the total stations in Leica’s line of iCON total stations and is completely Calibrated. This kit also includes a NEW Leica CC200 Panasonic Rugged Tablet with iCON Build Software. Leica’s all new AP20 tilt kit has been added to this kit, allowing accurate layout, without needing to level the prism rod. Call for more information. 1 – Leica iCR70 5 Robotic Total Station. PowerSearch, ATR, Reflectorless R500 EDM. Accuracy: Approximately 5/32 at 500 ft. 250m/820ft Reflectorless Range. 1 – Leica MPR122 360° Prism. 2 – Leica Li-Ion GEB222 Batteries. 2 – Leica Single Bay GKL311 Battery Chargers w/ Power Supply. 1 – Leica Total Station Transport Case. 1 Year iCR70 Basic CCP. 1 – New Leica CC200 10 Panasonic Rugged Tablet. Leica iCON Build Software Installed 1 – Leica Tablet Holder 1 – Leica GHT63 Pole Clamp 1 – Leica Charger 1 – Hard Transport Case. 1 – New Leica AP20 AutoPole. Targeting ID, Tilt Compensation, and Auto Rod-Height Detection 1 – CCD18 ICR Handle Upgrade 2 – Leica Li-Ion GEB321 Batteries 1 – AP20 Holding Case 1 – Leica AP20 AutoPole Rover Rod – Model: CRP5. 1 – SECO Trimax Tripod. 1 – SECO Bipod. Condition: In great used condition, fresh calibration! Layout lines for footings or chalk line for formwork on foundation. Layout points on blinding layer such as pipe insert or cut-outs before pouring concrete. MEP layout of hanger locations for HVAC and duct work, inserts and slits for sheet metal work. Fully automatic layout routines of points on floor or ceiling and lines for pipe wall penetrations.
Leica ICR70 5 Robotic Construction Total Station Kit. This kit includes a iCR70 Total Station which is primarily used with Concrete & General Contractors, Mechanical, Plumbing and Electrical Trades for Layout in buildings/structures. The iCR70 is one of the total stations in Leica’s line of iCON total stations and is completely Calibrated. This Kit also includes a Leica CS35 10 Tablet with iCON Build Software. 1 – Leica iCR70 5 Robotic Total Station. PowerSearch, ATR, Reflectorless R500 EDM. Accuracy: Approximately 5/32 at 500 ft. 250m/820ft Reflectorless Range. 1 – Leica MPR122 360° Prism 2 – Leica Li-ion GEB222 Batteries. 1 – Leica Single Bay GKL311 Battery Charger w/ Power Supply. 1 – LR-BT Communication CCD6 Black Handle. 1 – Leica Total Station Transport Case. 1 – Leica CS35 10 Rugged Tablet. Leica iCON Build Software Installed. Leica iCON Build Plus Software Installed. 1 – Leica GHT78 Tablet Holder. 1 – Leica GHT63 Pole Clamp. 1 – Leica Charger. 1 – Leica GEB236 Rechargeable Battery. 1 – Hard Transport Case. Leica Construction Robotic Pole. Layout lines for footings or chalk line for formwork on foundation. Layout points on blinding layer such as pipe insert or cut-outs before pouring concrete. MEP layout of hanger locations for HVAC and duct work, inserts and slits for sheet metal work. Fully automatic layout routines of points on floor or ceiling and lines for pipe wall penetrations.
Used Leica ICR70 5 Robotic Construction Total Station Kit. This kit includes a iCR70 5 Total Station which is primarily used with Concrete & General Contractors, Mechanical, Plumbing and Electrical Trades for Layout in buildings/structures. The iCR70 is one of the total stations in Leica’s line of iCON total stations and is completely Calibrated. 1 – Leica iCR70 5 Robotic Total Station. PowerSearch, ATR, Reflectorless R500 EDM. Accuracy: Approximately 1/4 at 500 ft. 250m/820ft Reflectorless Range. 2 – Leica Li-ion GEB222 Batteries. 1 – Leica Single Bay GKL311 Battery Charger w/ Power Supply. 1 – LR-BT Communication CCD6 Black Handle. 1 – Leica Total Station Transport Case. 1 – Used Leica CC80 7 Tablet with iCON Software (Contact for Pricing). 1 – Used Leica CS35 10 Tablet with iCON Software (Contact for Pricing). 1 – NEW Leica CC200 10 Tablet with iCON Software (Contact for Pricing). Layout lines for footings or chalk line for formwork on foundation. Layout points on blinding layer such as pipe insert or cut-outs before pouring concrete. MEP layout of hanger locations for HVAC and duct work, inserts and slits for sheet metal work. Fully automatic layout routines of points on floor or ceiling and lines for pipe wall penetrations.
Used Leica ICR70 5 Robotic Total Station Kit w/ CC200 Tablet. This kit includes a NEW iCR70 Total Station which is primarily used with Concrete & General Contractors, Mechanical, Plumbing and Electrical Trades for Layout in buildings/structures. The iCR70 is one of the total stations in Leica’s line of iCON total stations and is completely Calibrated. This kit also includes a Leica CC200 Panasonic Rugged Tablet with iCON Software. 1 – Leica iCR70 5 Robotic Total Station. PowerSearch, ATR, Reflectorless R500 EDM. Accuracy: Approximately 5/32 at 500 ft. 250m/820ft Reflectorless Range. 1 – Leica MPR122 360° Prism. 2 – Leica Li-Ion GEB222 Batteries. 2 – Leica Single Bay GKL311 Battery Chargers w/ Power Supply. 1 – Leica Total Station Transport Case. 1 Year iCR70 Basic CCP. 1 – Leica CC200 10 Panasonic Rugged Tablet. Leica iCON Software Installed 1 – Leica Tablet Holder 1 – Leica GHT63 Pole Clamp 1 – Leica Charger 1 – Hard Transport Case. 1 – Seco Trimax Tripod. 1 – Seco Bipod. 1 – Leica Prism Rod. Layout lines for footings or chalk line for formwork on foundation. Layout points on blinding layer such as pipe insert or cut-outs before pouring concrete. MEP layout of hanger locations for HVAC and duct work, inserts and slits for sheet metal work. Fully automatic layout routines of points on floor or ceiling and lines for pipe wall penetrations.
